Factors affecting propagating fronts of addition polymerization: Velocity,front curvature,temperatue profile,conversion, and molecular weight distribution

Several properties of propagating fronts of addition polymerization were studied. A power function could be fit to the velocity dependence on initiator concentration, but not with the exponents predicted by current models or in agreement with other published work. Bubbles from the volatile by-products of initiator decomposition were found to affect the front velocity and curvature. The front velocity for triethylene glycol dimethacrylate polymerization was found to depend linearly on temperature over a moderate range. The conversion of methacrylic acid in fronts varied greatly with initiator type and concentration. Benzoyl peroxide produced much lower conversion than t-butyl peroxide, but fronts with tBPO propagated slower. A dual initiator system of BPO and tBPO produced rapidly propagating fronts with good conversion but the contribution of each initiator to the velocity was not additive. The possibility of chain branching was considered. The apparent molecular weight distributions were very broad, often trimodal, and found to depend on initiator type and concentration as well as the tube diameter. The temperature profiles were measured and found to be very sharp for BPO and broader for tBPO but both had front temperatures in excess of 200°C, indicating a high ceiling temperature. © 1995 John Wiley & Sons, Inc.     

Conversion of phosphogypsum to potassium sulfate

Summary Solubility of calcium sulfate in concentrated aqueous chloride solutions is of particular significance in chloride hydrometallurgy and various crystallization processes, such as the production of potassium sulfate from phosphogypsum and potassium chloride. This paper examines an example of the second type of application in which gypsum and potassium chloride are reacted to form K₂SO₄. The solubility of phosphogypsum in aqueous solutions of KCl, HCl, and mixtures of both has first been measured at various temperatures and concentrations. The parameters investigated are HCl concentration up to 6M, KCl concentration up to 180 g L^-1 and temperature from 25 to 80°C. In addition, the influence of co-existing chloride salts, such as (HCl+KCl), on the solubility of calcium sulfate is estimated from 25 to 80°C. The solubility increases obviously with the temperature increment as it does initially with acid concentration, reaching a maximum of about 3M HCl, 130 g L^-1 KCl and then drops. At the same time, the solubility of CaSO₄·2H₂O decreases with increasing KCl concentration.     

紫外光引发甲基丙烯酸甲酯乳液聚合

以60W高压汞灯为光源,以偶氮二异丁氰(AIBN)为主要光引发剂,以甲基丙烯酸甲酯(MMA)为单体进行乳液聚合,考察了光照时间、单体浓度、光引发剂浓度等因素对单体转化率的影响;采用透射电镜观察了乳胶粒的形态,并测定了其尺寸.结果表明,转化率随光照时间和单体浓度的增加而上升;当光引发剂质量分数为3%时单体转化率最高.     

Synthesis and photovoltaic properties of main chain polymeric metal complexes containing 1,10‐phenanthroline metal complexes conjugating alkyl fluorene or alkoxy benzene by C═C bridge for dye‐sensitized solar cells

Four main chain polymeric metal complexes (P1–P4) based on 1,10‐phenanthroline metal complexes via the Heck coupling have been synthesized and characterized by Fourier transform infrared spectroscopy, ¹H NMR, UV–Vis absorption, photoluminescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, elemental analysis, and cyclic voltammetry. To investigate their photovoltaic properties, the dye‐sensitized solar cells based on these polymers dyes are studied, under the illumination of AM 1.5G, 100 mW/cm². The study results show the four polymers exhibit good thermally stable and the solar cells based on them have good device performance, and the maximum power conversion efficiency is up to 0.735% for the solar cells based on P3 with a short‐circuit current (J_sc) of 1.68 mA/cm² and an open‐circuit voltage (V_oc) of 0.62 V. Copyright © 2012 John Wiley & Sons, Ltd.     

Improved efficiency of organic solar cells with modified hole‐extraction layers

The aim of this work has been to study the influence of modified hole‐extraction layers on the performance of organic solar cells (OSCs) based on blends of poly (3‐hexylthiophene) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester. The hole‐extraction layers consist of poly (3,4‐ethylene dioxythiophene):polystyrene sulfonic acid (PEDOT:PSS) doped with different concentrations of bromine. Compared with pristine OSC without adding bromine to the hole‐extraction layer, the bromine‐doped OSCs show a 49% increase in the power conversion efficiency (from 2.12 to 3.16%), which could be attributed to the increase of electrical and optical properties of PEDOT:PSS films after the addition of bromine. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 125–128, 2012     

A Simple Strategy to Improve the Accuracy of the Injection Step in Batch Injection Analysis Systems with Amperometric Detection

In this study, we describe for the first time the application of an internal standard method to compensate for random errors associated with the injection procedure in batch injection analysis (BIA) systems with multiple pulse amperometric detection. A sequence of potential pulses was selected in such a way that the internal standard (IS) compound was detected individually at one potential pulse and both the IS and analyte, were detected at another potential pulse. The current ratio (I_IS+analyte/I_IS) was used in the construction of the calibration curve and then to compensate for random errors. The use of disposable syringes or manual pipettes in BIA systems increases the robustness of the method and dispenses with skilled operators.     

A reduced simulation applied to the viscoelastic fatigue of polymers

The paper extends the use of the PGD method to viscoelastic evolution problems described by a large number of internal variables and with a large spectrum of relaxation times. The internal variables evolution is described by a set of linear differential equations that involve many time scales. The feasibility and the robustness of the method are discussed in the case of a polymer in a non-equilibrium state under creep and cyclic loading. The relationships between different time scales (loading and internal variables) are also discussed.     

Naphthodithiophene-based donor materials for solution processed organic solar cells

As an emerging donor building block, naphthodithiophene (NDT) is causing more concerns in the field of organic semiconductors. With the rigid and coplanar molecule structure, NDT will exhibit more application space relying on its own advantage for facilitating the charge carrier transport. In this review article, we have summarized the development progress on the NDT-based donor materials for solution processed organic solar cells. Discussions and comments on those representative NDT type materials about structure and property are also presented.     

Computation and conversion of brain pH values obtained with two algorithms of phosphorus magnetic resonance spectroscopy data analysis

The intracellular brain pH in phosphorus magnetic resonance spectroscopy is calculated using the chemical shift between the inorganic phosphate and phosphocreatine with the Henderson–Hasselbalch equations. Researchers use various mathematical formulas that have different parameters and get various results for the same input data as a consequence. Thus, the aim of this article was to determine the mathematical formulas that allow the conversion of the pH values obtained by the most popular analysis methods to each other. To determine the relationships between pH results and the applied mathematical formula, the pH values were calculated using two algorithms for the theoretical chemical shift values. The pH results were compared with each other using the appropriate t-tests. Mathematical formulas were designed to simplify the conversion of pH values obtained by two data analysis methods to each other. The pH values with were obtained this way did not differ significantly from the pH values calculated directly from the given formula. The computed mathematical formulas will make it possible to simplify pH conversions without knowing the chemical shift between inorganic phosphate and phosphocreatine but only basing on the final pH values obtained by one of the formulas.